Tuesday, July 31, 2012

Event: Product Development Day (Penang)

Penang Kia, We're coming!

After the success of IME Open day in Klang Valley, we can't wait to bring similar technology sharing and travel all the way up to north to share a complete product development technology.

Want to know what is the update in CADCAM industry? Explore how to enhance your Product Lifecycle Management (PLM). Join us to learn about the latest product development technology in Penang Skill Development Centre (PSDC). You will definitely get different solutions for your organization.

Theme: Product Development Day
Highlight: Learn the latest product development technology
Location: Penang Skills Development Centre (PSDC), Penang
Date: 15 & 16th Aug 2012
More Information : CLICK HERE

See you there!

Thursday, July 26, 2012

Feature, Freeze

Parts with many features can sometimes result time wasted for rebuild the model. The last thing you want is to change a feature and then find that you have to wait for the feature tree to rebuild.

New in SolidWorks 2012, feature freeze gives control of these updates to the user. Designs can be frozen in time and locked so that they never require updates. Additional features can be added safely with the knowledge that minimal update time is required to edit and work on the design.

By default, feature freeze is not enable automatically upon installation of SolidWorks 2012

To enable feature freeze option:

Go to Tools > Options > System Options > General > Select Enable Freeze bar > Click OK.

The yellow freeze bar appears at the top of the Feature Manager design tree.

Feature freeze allow you to exclude features from rebuilds of the model. The freeze bar controls the point at which a part's FeatureManager design tree rebuilds. Features above the freeze bar are frozen- you cannot edit them, and they are excluded from rebuilds of the model. Freezing a portion of a model can be useful if you work with complex models with many features. Freezing the features helps to :

• Reduce rebuild time

• Prevent unintentional changes to the model

More information about feature freeze?

Wednesday, July 4, 2012

Aerodynamic design with SolidWorks flow simulation

Sharing with younger generation is a noble task. I never bored of giving talks and inspiration to students that passionate on innovation and design.  Let’s think, back to your teenager age, how many of you know about 3D CAD? Even 2D CAD is not in our mind. We just know about sketching with our favorite 2D pencil and ruler. Isometric drawing view? That’s killing me!

Last week, I had a visit to Melacca. Satay celup and nadaje layer cake is part of the reason. The main course is to give a sharing to a (big) group of secondary students who are in a competition. 1st of all, I’m jealous as they have this great exposure but no doubt, it’s a great start for them. Most of them knew SolidWorks basic modeling technique for a national competition – F1 in school.

This is Formula One 

This is Formula Student

This is F1 in school

Part of the presentation, I talked about flow simulation. I always have this worry is that are they too young to talk about flow simulation? Do they know about drag and lift force? Again, they gave me another surprise; they are good in this too! Mainly because of the competition, they need design a scale down CO2 formula 1 to compete with others. The main considerations are the weight and the aerodynamic design of the vehicle. Weight can easily monitor in SolidWorks but apply the right material.

SolidWorks flow simulation offers them a straight forward wizard base setup for external flow which allows them to learn flow simulation, easily. They can study the air flow over the vehicle. With better visualization, flow simulation gives a better insight on the pressure acting onto the design as well as the velocity. Like I said in the sharing, you don’t want your vehicle to have lift force instead of down force. If you have lift, your sport car will fly when ‘pump’ out from the compressed CO2. A cross section at your spoiler will let us know the pressure distribution above and below the design. Easily, you know your design is a car or a plane.

A cut section of flow simulation result

3D flow trajectories of a flow pattern

Okay, I try stopping myself to talk too much on technical feature. Just one last point to highlight, you can set an equation goal to calculate the drag and lift force. Example, coefficient of drag (Cd) can’t be obtain directly but other known value can be set a goal. At the end of the calculation, you have the drag and lift for you to compare the result. Easy?

sample result

After the sharing, I saw a lot of young and passionate designer. Truly wish with the assistant from a great tool – SolidWorks and SolidWorks flow simulation, they can visualize their imagination and design better and faster dragster to win the F1 in school competition. All the best young man!

Click here to know more about F1 in school

Click here for more product information about SolidWorks flow simulation

Click here to follow our Facebook fanpage and keep in touch.